
M2x0.4
.10” (2.54 m
depth
MINI HAWK SERIES SPECIFICATIONS AND OPTIONS
MECHANICAL
Height: 1” (25.4 mm) Width: 1.80” (45.7 mm)
Depth: 2.10” (53.3 mm) Weight: 2--oz (57 g)
ENVIRONMENTAL
Enclosure: IP54 (category 2)
Humidity: up to 90% (non-condensing)
Operating Temperature: 0° to 40°C (32° to 104°F)
Storage Temperature: -50° to 75° C (-58 to 167°F)
CE MARK
EN 55024: 1998 ITE Immunity Standard
EN 55022:98 ITE Disturbances
LIGHT SOURCE
Type: High output LEDs
LIGHT COLLECTION OPTIONS
Progressive scan, square pixel. Software adjustable
shutter speed, electronic shutter
MINI HAWK HR: 1280 by 1024 pixels (SXGA)
MINI HAWK HS: 752 by 480 pixels (WVGA)
SYMBOLOGY TYPES
2D Symbologies: Data Matrix, QR Code, Micro QR Code
Stacked Symbologies: PDF417, Micro PDF417,
GS1 Databar (Composite & Stacked)
Linear Bar Codes: Code 39, Code 128, BC 412, I2 of 5,
UPC/EAN, Codabar, Code 93
READ PARAMETERS
Pitch: ±30° Skew: ±30° Tilt: 360°
Decode Rate: Up to 60 decodes per second (HS model)
Focal Range: 1.3 to 9.3” (33 to 236 mm) (autofocus)
CONNECTOR
Type: 3 ft. cable terminated with High Density
15-pin D-Sub socket connector or USB Type A connector
INDICATORS
LEDS: Read Performance, Power, Read Status
Green Flash: Good read Blue V: Symbol locator
Beeper: Good read, match/mismatch, noread, serial
command con rmation, on/off
COMMUNICATION PROTOCOLS
Standard Interface: RS-232, RS-422, or USB
ELECTRICAL
Power: 5 VDC +/– 5 %, 200 mV p-p max. ripple,
494 mA @ 5 VDC (typ.)
Optional Int.: 10-28 V Accessory
HOST CONNECTOR/PIN ASSIGNMENTS
High Density 15 Pin D-sub Socket Connector
Pin Host Host/Aux Host In/
No. RS232 RS232 RS422/485 Out
1 Power +5 VDC In
2 TxD TxD TxD(–) Out
3 RxD RxD RxD(–) In
4 Power/Signal Ground
5 NC
6 RTS
Aux TxD TxD(+) Out
7 Output 1 TTL
a
Out
8 Default con guration
b
In
9 Trigger In
10 CTS Aux RxD RxD (+) In
11 Output 3 TTL
a
Out
12 New Master (NPN) In
13 Chassis ground
c
14 Output 2 TTL
a
Out
15 NC
a. Can sink 10 mA and source 10 mA.
b. The default is activated by connecting pin 8 to ground pin 4.
c. Chassis ground: Used to connect chassis body to earth
ground only. Not to be used as power or signal return.
SAFETY CERTIFICATIONS DESIGNED FOR
FCC, UL/cUL, CE, CB
ROHS/WEEE COMPLIANT
ISO CERTIFICATION
Issued by TüV USA Inc, Member of TÜV NORD
Group, Cert No. 06–1080
©2009 Microscan Systems, Inc. SP057A-D 03/09
Read Range and other performance data is determined using high
quality Grade A symbols per ISO/IEC 15415 and ISO/IEC 15416 in a
25°C environment. For application-speci c Read Range results, testing
should be performed with symbols used in the actual application.
Microscan Applications Engineering is available to assist with evalu-
ations. Results may vary depending on symbol quality. Warranty–One
year limited warranty on parts and labor. Extended warranty available.
Front
Base
DISCRETE I/O
Trigger Input: 5 to 28 VDC rated (.16 mA)
New Master: 5 to 28 VDC rated (.16 mA)
Outputs (1, 2, 3): 5V TTL compatible, can sink 10 mA and
source 10mA
Optional I/O: Optoisolated (with IC-332 accessory)
READ RANGES
(GRAPHS AND TABLES)
MINI HAWK HS units used for data collection. Data subject to change.
Narrow-bar-width Field of View Read Range
1D 2D
(maximum) (using autofocus)
Ultra High Density
.0033” (0.08 mm) .005” (.13 mm) 1.1” (29 mm) 1.9 to 3.0” (48 mm to 76 mm)
.005” (0.13 mm) .075” (.19 mm) 1.8” (45 mm) 1.8 to 5.0” (46 mm to 127 mm)
.010” (0.25 mm) .15” (.38 mm) 2.5” (64 mm) 1.6 to 7.0” (41 mm to 178 mm)
Standard Density
.005” (0.13 mm) .0075” (.19 mm) 2.7” (69 mm) 1.7 to 3.4” (43 mm to 86 mm)
.0075” (0.19 mm) .010” (.25 mm) 3.7” (93 mm) 1.6 to 5.0” (41 mm to 127mm)
.010” (0.25 mm) .15” (.38 mm) 4.7” (118 mm) 1.4 to 8.0” (36 mm to 203 mm)
.020” (0.51 mm) .030” (.76 mm) 5.3” (136 mm) 1.3 to 9.3” (33 mm to 236 mm)
20 mil 1D | 30 mil 2D
10 mil 1D | 15 mil 2D
5 mil 1D
7.5 mil 2D
7.5 mil 1D | 10 mil 2D
1 2 3 3 2 1
76 51 25
25 51 76
.5 51 102 127 152
20 mil 1D | 30 mil 2D
10 mil 1D | 15 mil 2D
5 mil 1D
7.5 mil 2D
7.5 mil 1D | 10 mil 2D
.5 1 1.51.5 1 .5
38 25 13
38 25 13
.5 51 102 127 152
10 mil 1D | 15 mil 2D
5 mil 1D | 7.5 mil 2D
3.3 mil 1D
5 mil 2D
10 mil 1D | 15 mil 2D
7.5 mil 1D | 10 mil 2D
3.3 mil 1D | 5 mil 2D
WI-SYSTEME GmbH
Am Bäckeranger 1
85417 Marzling
Tel: ++49 (0) 81 61 - 98 909 - 0
Fax: ++49 (0) 81 61 - 98 909 - 22
www.wi-sys.de
Zertifizierter Microscan Partner
Komentáře k této Příručce