Microscan MS-96 Uživatelský manuál stáhnout pdf (Strana 20)

Test for Read Rate

1-8 MS-9 Scanner User’s Manual

Step 7 — Test for Read Rate

If you don’t have a test symbol, print out this page and use the symbol here for

testing. With this test you can learn the percentage of decodes per images captured by

observing the LEDs (20% through 100%) on the top of the scanner which are active

during a read rate test.

By ESP

After connecting to the scanner, ESP will open in Setup Mode.

1. Click the Test button in Setup Mode to begin the read rate test.

2. Follow the instructions in Setup Mode screen.

3. To end the Read Rate test, click the Stop button.

Note: If the scanner is in the default Continuous Read mode, it will read and beep

repeatedly as long as a readable symbol remains in the read range and the read cycle

configuration has not changed.

Note: See “Formulas for Number of Decodes” on page A-27 for additional infor-

mation on scan width and depth of field.

By Serial Commands

Send an <C> to begin the read rate test.

Send a <J> to end the read rate test.

20 mil Code 39 Test Symbol

You can also find test symbols on the

back of the Microscan Marketing CD

jacket. The 20 mil refers to the width of

the narrowest bar (e.g., 7.5 mil =

.0075" or .1905 mm).

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 225 226

Žádné komentáře

Microscan MS-96 Uživatelský manuál Strana 20