
MS-4 Imager User’s Manual 1-3
Quick Start
Step 2 — Connect the System
Connecting by RS-232 / RS-422
• Connect the Imager (1) to the IB-3PC interface (2).
• Connect the comm. cable (
4
) to the host (
5
) and to the host connector on the IB-3PC (
2
).
• Connect power supply (3) to the IB-3PC (2).
• Apply power to the Imager.
Connecting by USB
• Plug the MS-4 Imager’s USB cable into a host USB port. The host will power the Imager.
Hardware Configuration
(RS-232 / RS-422)
Hardware Configuration
(USB)
Caution: Be sure that all cables are connected BEFORE applying power to a
system with an external power source (RS-232 / RS-422). Always power down
BEFORE disconnecting any cables.
To additional imagers
or terminating resistor
To host
1
Komentáře k této Příručce